Blog

IMG-BLOG
22 Eki, 2020

Quality Control Tests In PE Pipes

netborplastic | 22 Ekim 2020

1. Determination of Internal Pressure Resistance (TS EN ISO 1167-1 / TS EN ISO 1167-2):

         It is the test in which the behavior of pipes against pressure over time is examined by considering the ambient conditions. It is aimed to observe the changes that may occur in a 50-year-old pipe by applying pressure conditions determined according to the PN value and the desired temperature to the pipes.

It is a test method in which ...

Read More
IMG-BLOG
21 Eki, 2020

Fıeld Applıcatıons In PE Pıpes

netborplastic | 21 Ekim 2020

1. Lowering the Pipes:


         HDPE100 pipes should be taken to a suitable stockpile where they will be least affected by weather conditions depending on the time until they are laid.

         When lowering the pipes in the stock area, it is recommended to use cloth ropes / ropes with appropriate strength, taking into account the weight of the hanging pipe. It is not appropriate to use cha ...

Read More
IMG-BLOG
21 Eki, 2020

Joining Methods In PE Pıpes

netborplastic | 21 Ekim 2020

1. Butt Welding:        

        Polyethylene pipes can be produced to be combined by butt welding method according to the feature of the project to be applied. However, there are technical restrictions for both diameter and wall thickness in joining with this welding method. With this welding method, joining is made from a diameter of 50 mm to 1600 mm and from a minimum wall thickness of 5 mm to a wall thickness of 100 mm de ...

Read More
IMG-BLOG
20 Eki, 2020

What is PE Pipe?

netborplastic | 20 Ekim 2020

        Polyethylene is a thermoplastic used in a wide variety of products. It is named after monomer ethylene.

        In the plastics industry it is often referred to as PE. Polyethylene is classified into various categories based on density and chemical properties. HDPE is a high density polyethylene material obtained from petroleum. It is the acronym for high density polyethylene, which is the English equivalent. Approximately 1.75 kg of crude ...

Read More
IMG-BLOG
20 Eki, 2020

What is Polyethylene?

netborplastic | 20 Ekim 2020

        Polyethylene is a type of large molecular mass polymer formed by covalent bonding of small molecular mass ethylene monomers.

        Polyethylene is classified into various categories based on density and chemical properties. Mechanical properties depend on molecular weight, crystal structure and branching type.

  • UHMWPE (ultra high molecular weight PE)
  • HDPE (high density PE)
  • HDXLPE (high density cross-linked ...

    Read More